Rust-Oleum Hard Hat
About this product:
Hard Hat Aerosol Topcoats 2100 are based on a fast drying short oil soya alkyd. The products are based on lead- and chromate free pigments.
Technical Information
Touch Dry
15 minutes
Recoatable
Within 1 hour or after 48 hours
Coverage
2.5m² per 400ml
Finish
Metallic
Key Benefits
- Restores metallic look
- Use on bare metal, galvanised, zinc primers or anti-rust primers
- Heat-resistant up to 100°C
- Usable as topcoat on zinc primers and galvanised
Product Information
-
Sizes
400ml Aerosol
Application Method
Remove cover cap. Shake vigorously for at least one minute after the rattle of mixing ball isheard. Shake frequently during use. Hold can at least 25 cm from surface. Use back and forth motion keeping can parallel with surface. Ensure that can is in motion when spray button is pressed to avoid runs and sags. Apply several thin layers at a few minutes interval to achieve adequate coating thickness. After use turn can upside down and press spray button for 2 – 3 seconds to clean valve.
