Showing 1–9 of 12 results
-
Tor Anti Climb Paint Black
Apply 1 coat by stiff nylon brush or lambswool mitt. Only apply to areas above 6ft from ground...
-
Tor Ardenbrite™ (Water Based)
For small areas application is by brush or roller. For larger areas the preferred application method is by...
-
Tor Farm Oxide Semi-Gloss
Apply by brush or short pile roller. By reducing with 15-20% Tor TH5 or TH10 can also be...
-
Tor HB Micaceous Iron Oxide
Apply by brush or airless spray (will require reduction with 10% Tor TH10 for airless spray) (tip size...
-
Tor Matt Black
Apply by brush, short pile roller or air spray (reduce with 20% Tor TH10).
-
Tor Non-Taint Bitumen Primer
Apply by spray, brush or roller. Airless tip size 0.015-0.017” and 1800-2100 psi atomising pressure.
-
Tor QD Thinner (TH19)
Used for the thinning (where necessary) of Tor Quick Drying Machinery Primers and finishes and for the cleaning...
-
Tor Quick Drying Red Oxide Primer
Apply by brush, short pile roller or airless spray (tip size 0.019” to 0.021” and 2000 psi atomising...
-
Tor T-Wash Mordant Solution
Apply by brush, sponge or dip. Spray is not recommended. After treatment rinse with clean water and allow...
