Little Greene Intelligent Satinwood
About this product:
A high-performance ambient cross-linking water based acrylic satinwood finish with excellent wash, wear, stain resistance and mild chemical resistance. Highly recommended for wooden furniture and trim.
Technical Information
Surface dry
1-2 hours
Recoatable
2-3 hours minimum
Coverage
12m² per litre
Finish
Satinwood
Key Benefits
- Hard wearing
- Easy to apply
- Washable
- Low odour
Product Information
-
Sizes
2.5lt, 1lt
Application Method
Stir thoroughly before use. Do not apply to surfaces when the ambient temperature is below 8o C.
Brushing: Use a high quality synthetic bristle brush that is suitably sized for the project at hand. New brushes should be conditioned by washing in clean water and thoroughly drying with a clean, lint free, cloth. Avoid immersing brush too far into the paint to prevent paint from entering the ferrule. Avoid drips and splashes by not overloading the brush. Apply paint in even strokes and only extend painting area such that a wet edge can be easily maintained. For the highest quality appearance, keep final brush strokes all in the same direction and never go over paint that has already begun to dry.
Roller: Use a short nap wool blend type sleeve for best appearance on smooth surfaces. Increase nap length for textured surfaces, as appropriate, to ensure even and thorough coverage. Keep final strokes all in the same
