Sadolin Floor Varnish
About this product:
Sadolin Extra Durable Floor Varnish is formulated with combined polymer chemistry to prolong the life of interior wooden floors, while retaining the wood’s natural warmth and beauty. This hard wearing, non-yellowing floor varnish is easy to apply and provides extra protection in high traffic areas.
Technical Information
Touch Dry
1-2 hours
Recoatable
2-4 hours
Coverage
Up to 15m2/litre
Key Benefits
- Use on hardwood
- Use on softwood boards
- Use on parquet
Product Information
-
Sizes
2.5lt, 5lt
-
Colours
Clear
Application Method
Timber surfaces must be suitably prepared, clean, sound and dry. The moisture content should not exceed 14% prior to coating. “Knotting agents” should not be used with Sadolin varnish systems. Fillers specifically designed for use with timber such as the Sadolin woodfillers should be used for making good any minor surface defects, imperfections and open joints etc. General or All Purpose fillers are not suitable. Surfaces should be carefully denibbed between coats using a fine grade nylon abrasive pad or fine grade (P240 or finer) wet or dry silicone carbide abrasive paper, in the direction of the grain. Do not break through the surface coating. Remove all dust. Only use non – ferrous screws, nails and fixings. Drying times are dependent upon absorption of substrate and drying conditions. At low temperatures and / or conditions of high relative humidity, drying times will be extended. Allow 24 hours before replacing furniture.
