Polycell Stain Block Aerosol
About this product:
Polycell Trade Stain Block Aerosol 500ml permanently blocks and seals problem stains such as water, nicotine, graffiti, grease and soot.
Technical Information
Drying Time
10 minutes
Coats Required
2
Key Benefits
- Permanently blocks and seals stains
- Can be overpainted in around 10 minutes.
- Interior use only
Product Information
-
Sizes
500ml aerosol
Application Method
- Ensure surface is clean, dry and free from loose material. When applying it is advisable to wear eye protection. When stopping stains caused by water or damp, make sure that the original cause of the problem has been rectified. Shake well until you hear the steel pellet rattling and then continue for 1 minute more. Spray evenly over stain from a distance of 20-30 cm (9″-12″) until the stain is fully covered. Allow at least 10 minutes to dry before painting or wallpapering For especially stubborn stains, allow Polycell Stain Stop to dry fully, then apply a second coat. If overpainting with gloss or eggshell paint, first prime treated areas with water-based paint. After use, invert the can and spray until the nozzle is cleared to prevent clogging.
