Little Greene Masonry Paint
About this product:
A high quality resin water-based paint for exterior masonry surfaces. Dries to a water vapour permeable film with excellent adhesion to prepared surfaces. Formulated to withstand normal building movement and resistant to the effects of sunlight and moisture.
Technical Information
Surface dry
2 hours
Recoatable
4 hours minimum
Coverage
13m² per litre
Finish
Matt
Key Benefits
- Environmentally-friendly
- Water-based
- Quick-drying to a smooth finish
- Will last 15 years on exterior walls before repainting is required
- Resists dirt
- Contains anti-fungal and anti aging properties to look good for longer
Product Information
-
Sizes
5lt
Application Method
Stir thoroughly before use. Do not apply to surfaces when the ambient temperature is below 5oC or if there is a risk of rain during application or drying. Avoid painting in full sun or on warm surfaces. For best results, always attempt to time the painting of a given elevation prior to exposure to direct sunlight.
Brushing: Use a high quality synthetic bristle brush that is suitably sized for the project at hand. New brushes should be conditioned by washing in clean water and thoroughly drying with a clean, lint free, cloth. Avoid immersing brush too far into the paint to prevent paint from entering the ferrule. Avoid drips and splashes by not overloading the brush. Apply paint in even strokes and only extend painting area such that a wet edge can be easily maintained. For the highest quality appearance, keep final brush strokes all in the same direction and never go over paint that has already begun to dry.
Roller: Use a short nap wool blend type sleeve for best appearance on smooth surfaces. Increase nap length for textured surfaces, as appropriate, to ensure even and thorough coverage. Keep final strokes all in the same direction, maintaining a wet edge throughout. Never be tempted to go over already drying paint as this will lead to lap marking and flashing.
