Hammerite Direct to Galvanised Metal Paint

About this product:

Hammerite Direct to Galvanised Metal Paint is specially formulated for application straight onto non-rusting metal, such as galvanised steel, aluminium, copper and brass, as a primer and topcoat in one.

Technical Information

Drying Time

4 hours

Recoatable

6 hours

Coverage

15m²/litre

Finish

Smooth gloss

Key Benefits

  • Can be applied direct to galvanised surfaces
  • No need for a primer
  • Only one coat required
  • Glossy, smooth finish for non-ferrous metals

Product Information

  • Sizes

    750ml

  • Colours

    Various

Application Method

This product is for objects that are made from bare zinc, aluminium or galvanized metal.

Before painting remove all loose rust and flaking paint from the metal using a wire brush. If the metal was already painted, wash down thoroughly with diluted detergent, rinse with clean water and allow to dry. For smooth metal surfaces, lightly abrade for maximum adhesion. Stir the paint thoroughly before use, and apply with a good quality brush. Apply two thin coats of paint for the best results, leaving to dry in between coats.

Suitable for products such as metal doors, metal garden furniture, metal gates and metal railings.