Gyproc Easi-Fill 45

About this product:

Lightweight plasterboard joint filler and finish, formulated for easy mixing and sanding, and consistent setting time. May also be used for many other internal adhesive and filling applications.

Technical Information

Water requirement

Approx. 7 litres per 10kg

Workable

45 minutes

Recoatable

70 minutes

Key Benefits

  • Low shrinkage
  • Only two applications required
  • Pre-fills gaps and holes
  • Use for fixing of beads

Product Information

  • Sizes

    10kg

Application Method

Apply Gyproc Easi-Fill 45 to the joint to embed the tape and immediately overcoat to fully fill the tapered board edges and just feather out onto the board surface. Allow to set – minimum 70 minutes – then apply the finishing coat, feathered out beyond the first.

Procedures for finishing angle joints, screw spotting, etc. are similar.