Gyproc Easi-Fill 20

About this product:

A lightweight quick setting filler ideal for patching repairs and small jointing jobs. The product offers a combined setting and air-drying gypsum-based material for bulk filling and finishing. Gyproc EasiFill 20 is easy to mix and fast setting. It has a high coverage rate with minimal drying shrinkage and is easy to sand. Gyproc EasiFill 20 is part of a range of products offering different setting and workability times depending on their intended use.

Technical Information

Water requirement

Approx. 7 litres per 10kg

Coverage

Approx. 10lm/kg

Workable

20 minutes

Recoatable

30 minutes

Key Benefits

  • Easy to mix
  • Fast setting
  • Minimal drying shrinkage
  • Easy to sand

Product Information

  • Sizes

    10kg, 5kg

Application Method

Apply Gyproc EasiFill 20 to the joint to embed the tape, then immediately overcoat to fully fill the tapered board edges and feather out onto the board surface. Allow to set for a minimum of 30 minutes, and then apply the finishing coat. Gyproc EasiFill 20 can be over-coated even when it’s not entirely dry, although it must have set.

The procedure for finishing angle joints, screw spotting, etc is similar.