Technical Information
Tack Free
15-60 minutes
Over-paint
1 hour
Full Cure
3-5 days
Key Benefits
- Fast-drying – can be overpainted in 1 hour
- Easy water clean up
- Excellent slump resistance
- Can be used to fill damaged plaster
- Permanently flexible
Product Information
-
Size
Trade size
-
Colour
White
Application Method
Cut the tip of the cartridge taking care not to damage the thread. Apply nozzle and cut cleanly at an angle of 45 degrees with an opening slightly larger than the gap to be sealed. Apply using a standard sealant gun. Best results will be obtained by keeping an even pressure on the gun trigger and keeping the gun at a constant angle to the surface being sealed. Smooth down within 20 minutes of application using a wetted spatula, piece of wood or wetted gloved finger. Care should be taken at this point not to saturate the surface as this will delay drying. Any excess sealant etc., can be removed using a sponge and warm water. Can be overpainted after 1 hour.