Technical Information
Dry
2-4 hours
Recoatable
2-4 hours
Coverage
Up to 30m² with 1 coat
Key Benefits
- One coat coverage
- Quick drying
- Easy application less mess
Product Information
-
Sizes
6lt
-
Colours
Various
Application Method
Stir thoroughly before use. Try a test area first to ensure that colour and adhesion are acceptable. Please note that the colour in the tub may be different to the final shade when dry. Brush on evenly along the grain. If a deeper colour is required, more coats can be applied. Allow 2-4 hours between coats under normal weather conditions. Product should only be used on rough sawn timber. Do not apply in temperatures below 5 degrees C, in damp conditions or if rain is likely before the product has dried. If using more than one can it is advisable to mix them together in a larger container or finish painting in a corner before starting a new can.
Drying times can vary depending on the nature of the surface and the weather conditions.
Ensure surfaces to be painted are clean. Remove any mould, lichen, algae or moss using an appropriate fungicidal wash.