Coo-Var Hammercote Hammered Metal Paint
About this product:
A fast-drying coating giving a metallic hammered finish to metallic objects.
Up to 10m2/litre
- Can be used without a primer
- Provides a hard durable film
- Heat Resistant up to 150°C
- Hard Wearing
- Rust Resistance
Mix well before use. Apply direct to prepared metal or Rapidry Zinc Phosphate Primer.
By Brush: apply a thin coat briskly to the surface. Leave for 2-4 minutes before re-coating with a full coat.
By Spray: do not thin. Simply apply a mist coat followed by a full coat after 2-4 minutes. When more than one coat is required (e.g. on rough surfaces), re-coat as soon as the first coat is dry – usually within 15 minutes. Any further coats by brush or spray should be applied as soon as possible but certainly within 4 hours after which time the Hammercote will have started the curing period. Heat resistant to 150°C. Full hardness is reached after several days. Do not thin Hammered Finish for spraying. Cannot be successfully coated with conventional paints.