Bedec Super-Flex

About this product:

Bedec Super-Flex is a flexible elastomeric coating easily applied by brush, roller or spray to form a high build, seamless waterproof coating which economically prevents or cures all types of leaking roofs, gutters and walls. Super-Flex remains flexible and elastic to allow for movement of the substrate forming a long life protective coating.

Technical Information

Touch Dry

4-6 hours


24 hours

Roof Coverage

Up to 2m² per litre

Wall Coverage

Up to 10m² per litre

Key Benefits

  • Elastomeric flexible coating for roofs and walls
  • Stays flexible for years
  • Free from toxic hazards
  • Ready for use
  • Reduces maintenance costs

Product Information

  • Sizes

    5lt, 2.5lt

  • Colours


Application Method

Apply by brush, roller, conventional H.V.L.P or airless spray. Stir well and check colour before use. Do not apply at air or surface temperatures below 10°C or when likely to rain before the paint has fully dried.

If the repair involves only small-localised cracks or fractures, apply two full coats of Super-Flex over the treatment previously outlined.

Where the complete roof surface is to be weatherproofed, after necessary preparation as outlined, apply two full coats of Super-Flex allowing thorough drying between each coat. In ALL cases, the Super-Flex finishing coats must be brushed at right angles to each other. On roof surfaces, Super-Flex finishing coats should be applied to a maximum of 2.sq metres per litre per coat.

Apply by “laying on” and do not apply like paint. Do not apply to wet or damp surfaces, or where there is a likelihood of rain or fog before Super-Flex has dried.